Technical information

AnyWair - kit contents (UTY-ANY1)
These items are what comes in the box with the anywAiR ducted controller. anywAiR controller 190mm x 115mm x 40mm (inc. mount) Cont...
Wed, 1 Mar, 2023 at 3:38 PM
AnyWair ducted controller (UTY-ANY1)
The AnyWair ducted controller (UTY-ANY1) wires together as shown
Wed, 1 Mar, 2023 at 3:44 PM
AnyWair ducted controller (UTY-ANY1) main screen layout
Below is the main screen for the AnyWair ducted controller
Wed, 1 Mar, 2023 at 3:46 PM
Setting the timer on the Anywair ducted controller (UTY-ANY1)
Wed, 1 Mar, 2023 at 3:47 PM
VR-II controller options
Wed, 1 Mar, 2023 at 3:50 PM
Wired remote controller wiring
The two wired remote controller uses non-polar 2-wire type However the three wire remote controllers are polarity sensitive
Wed, 1 Mar, 2023 at 3:53 PM
J Series Address Setting
The only way to set the address on a J Series indoor unit is through the wireless controller. Also ensure that the capacity switches on the in...
Mon, 13 Mar, 2023 at 4:09 PM
VII - Changing a master unit to a slave
If you have a system that has two/three outdoors on the same refrigerant circuit and need to remove one of the units temporarily due to a failure, a few cha...
Wed, 15 Mar, 2023 at 3:07 PM
VRF - VII test Run
Wed, 15 Mar, 2023 at 3:11 PM
VRF - VII Test Run from controller
Wed, 15 Mar, 2023 at 3:26 PM