GENERAL AIRSTAGE Technical Reference

Multihead Indoor Unit Controller Guide

Which controller is supplied with each indoor unit?
Quick reference for controller compatibility across selected multihead indoor unit types.
Quick answer: The controller supplied as standard depends on the indoor unit type. Some indoor units are supplied with a wireless remote controller, while others are supplied with a wired remote controller.

Controller supplied as standard

Indoor Unit TypeSeries / Model FamilyController SuppliedController Type
Wall MountedKMCDAR-REW3EWireless Remote Controller
Wall Mounted18KMTD / 24KMTCAR-REW1EWireless Remote Controller
FloorKVCA*AR-REM7EWireless Remote Controller
Ceiling ConsoleKRTANo standard controller identified in this chartRefer to the specific indoor unit documentation before ordering
Compact CassetteKVLAAR-REJ1EWireless Remote Controller
Bulkhead / Mini DuctKSLAP / KLLAPUTY-RNRYZ3Wired Remote Controller
Mid Static SlimlineKMTAPUTY-RNRTWired Remote Controller
Important: Controller supply and compatibility can vary depending on the exact indoor unit model and generation. Always confirm the complete indoor unit model number before ordering a replacement controller.

Optional Wired Controllers

A number of alternative wired controllers can also be used with selected multihead indoor units.

ControllerTypeNotes
UTY-RNRYT5Wired Remote ControllerOptional across the listed indoor unit types. Some wall mounted and floor models require an additional communication kit.
UTY-RVNYNWired Remote ControllerOptional for KMTAP mid static slimline indoor units.
UTY-RVRYWired Remote ControllerOptional across the listed indoor unit types.
UTY-DMMYM1Group ControllerOptional across the listed indoor unit types. Communication kits may be required on specified models.

Communication Kits

Some wall mounted and floor mounted indoor units require an additional communication kit when connecting an optional wired or simple controller.

UTY-TWRXZ2 – Required where the compatibility chart shows ○1.
UTY-TWRXZ3 – Required where the compatibility chart shows ○2.

Compatibility Legend

AStandard accessory supplied with the indoor unit.
○Optional accessory.
○1Optional accessory. Communication Kit UTY-TWRXZ2 is required.
○2Optional accessory. Communication Kit UTY-TWRXZ3 is required.
–Not shown as compatible in the controller compatibility chart.
5-Room Multi Note: The marked KVCA floor unit application is not compatible with the 5-room multi outdoor units AOTH36KBTA5 and AOTH45KBTA5.

Before Ordering a Controller

  • Confirm the complete indoor unit model number.
  • Check whether the required controller is supplied as a standard accessory or must be ordered separately.
  • Confirm whether a communication kit is required.
  • For replacement controllers, confirm compatibility with the exact indoor unit generation before ordering.