GENERAL AIRSTAGE Technical Reference
anywAiR® technology Zoneconnex
UTY-ZCAW1 Wi-Fi Ducted Zone Controller
Flexible zone control for selected GENERAL Airstage ducted air conditioning systems
Zoneconnex is a flexible, cost-effective Wi-Fi zone control solution designed to provide precise comfort and simplified control for compatible GENERAL Airstage ducted air conditioning systems. It supports up to 10 independent zones and provides individual airflow management across multiple areas.
1. Key features
| 10 Zone Comfort Control Supports up to ten independent zones, allowing personalised comfort while reducing unnecessary conditioning of unused areas. | Fine-Tuned Airflow Precision Zone airflow can be adjusted in precise 5% increments for accurate control and improved comfort. |
| Smart Wi-Fi Connectivity Built-in Wi-Fi enables control from the anywAiR Zoneconnex mobile app on compatible iOS and Android devices. | Intelligent Scheduling Create and manage user-defined schedules to support consistent comfort with reduced manual adjustment. |
| Streamlined Set-up Connects directly to the indoor unit PCB for reliable system communication and efficient installation. | Broad Compatibility Compatible with a range of GENERAL Airstage ducted systems and suitable for residential and light commercial applications. |
2. Control from anywhere
When the Zoneconnex controller is installed and connected, users can control their compatible ducted system through the anywAiR® Zoneconnex app on a compatible smartphone or tablet.
- Remote access via compatible iOS or Android device.
- Easy zone and temperature control.
- Adjust system settings and operating modes.
- Add, edit and view saved schedules.
- Clean, user-friendly interface for everyday use.
Important: The anywAiR Zoneconnex app is only compatible with selected GENERAL Airstage ducted air conditioners when the optional Zoneconnex controller is installed. Zoneconnex is not a standard inclusion with the air conditioning system and must be installed by a suitably qualified GENERAL Airstage air conditioning specialist.
3. Compatible indoor units
| Indoor Unit Type | Compatible Indoor Models |
|---|---|
| High Static Ducted | ARTH24KHTA, ARTH30KHTA, ARTH36KHTA, ARTH45KHTA, ARTH54KHTA, ARTH60KHTA, ARTH60KHTB, ARTH65KHTA, ARTH72KHTA, ARTH90KHTA |
| Mid Static Ducted | ARTH18KMTAP, ARTH24KMTAP, ARTH30KMTAP, ARTH36KMTAP, ARTH45KMTAP, ARTH54KMTAP |
| Ducted Bulkhead | ARTH09KLLAP, ARTH12KLLAP, ARTH18KLLAP, ARTH09KSLAP, ARTH12KSLAP, ARTH18KSLAP |
Compatibility check: Confirm the indoor unit model before installation. The compatibility list above is based on the current GENERAL Australia Zoneconnex product-release information.
4. UTY-ZCAW1 package contents
- Zoneconnex Controller (ACBM)
- TouchPoint LCD Controller Tablet
- LoRa antenna
- 24 VAC power supply
- 15 m 4-core 24 AWG LCD power/communication cable
- 2 m PAP-04V-S UART communication cable
- Pan head self-tapping screws - 8 x M3 x 25 mm
5. Technical information
| Component | Details |
|---|---|
| Zoneconnex package model | UTY-ZCAW1 |
| Maximum zones | Up to 10 independent zones |
| Zone motor support | Up to 10 x 24 VAC RJ12 zone motors |
| Airflow adjustment | 5% increments |
| Controller dimensions | 105 mm (H) x 112 mm (W) |
| Controller tablet dimensions | 112 mm (H) x 181 mm (W) |
| Optional sensor dimensions | 123 mm (H) x 41 mm (W) |
6. Optional temperature and humidity sensor
Model: TS-ZC1
The optional wireless temperature and humidity sensor can be used to measure room conditions without complex control wiring. It is intended to provide additional room temperature and humidity sensing capability within a Zoneconnex installation.
Availability: Product-release information identifies the TS-ZC1 as an optional accessory. Availability should be confirmed at the time of ordering.
7. Installation and commissioning notes
- Zoneconnex connects directly to the compatible indoor unit PCB using the supplied UART communication cable.
- Built-in Wi-Fi provides mobile connectivity for supported control functions.
- The onboard Wi-Fi access point can be used during commissioning, allowing the installer to configure the system without needing access to the customer's Wi-Fi network during the initial setup.
- During commissioning, zones can be named, damper limits can be set, and sensors can be paired.
- Confirm the indoor unit model is listed as compatible before installation.
8. Quick reference
| Product | anywAiR® technology Zoneconnex |
| Model | UTY-ZCAW1 |
| Category | Wi-Fi Controller / Ducted Controller |
| Zones | Up to 10 |
| Zone airflow control | 5% increments |
| Mobile control | Compatible iOS and Android devices via anywAiR Zoneconnex app |
| Optional sensor | TS-ZC1 Temperature & Humidity Sensor |
Note: Product compatibility and availability may change. Always confirm the current product documentation and indoor unit model before installation or ordering accessories.