Wi-Fi Controller Compatibility Guide
Identify the correct controller or Wi-Fi pathway from the indoor model number and avoid recommending an adaptor that creates unnecessary installation, cabling or future-access issues.
CHECK
BEFORE
ADVISING
Quick selectorDucted controllerWi-Fi selectionModel lists
Important recommendation position
Recommend the NXT USB Wi-Fi adaptor only where the indoor unit has a confirmed, user-accessible USB slot. This is primarily the KMTC, KMTD and KMTE wall-mounted range. Other compatible systems require an adaptor box and cable connected to the indoor PCB, which normally means a licensed installer, additional labour and more difficult future access. Do not describe those installations as a simple plug-in option.
Section 1
Quick selector
Start with the exact indoor unit model number from the rating label.
Customer requirementRecommended pathwayKey check before advice
Ducted zoning and touchscreen controlUTY-ANY1 / UTY-ANY2 anywAiR Ducted ControllerIndoor model must be listed. Existing ductwork, dampers, transformer capacity and spill/bypass strategy still require assessment.
Wi-Fi on KMTC, KMTD or KMTE wall unitPreferred direct USB pathwayConfirm the exact model and physically confirm the accessible USB slot before quoting.
Wi-Fi on ducted, cassette, console, VRF or other listed wall unitUTY-NXT-BOX plus UTY-NXT-CAB installer-connected pathwayConfirm service access to the indoor PCB, cable route, licensed-installer cost and future access.
Freshdesk tip: Use Ctrl + F in the article and search the full indoor model number. Do not use only the outdoor model or capacity description.
Section 2
Ducted controller selection
Which systems can use the anywAiR Ducted Controller Touch Pad?
Use UTY-ANY2 when:
The ducted indoor unit appears in the compatible list and the duct and damper arrangement is suitable for zone control. UTY-ANY1 is superceeded by the UTY-ANY2.
1. Identify model2. Check list3. Assess ductwork4. Advise solution
LISTED AND SUITABLE
Recommend UTY-ANY2, subject to installation design and assessment.
NOT LISTED OR UNCERTAIN
Do not promise compatibility. Refer the model and installation details for technical review.
Section 3
Wi-Fi selection
Choose between the preferred direct USB pathway and the installer-connected box-and-cable pathway.
Preferred pathway
Direct USB installation
Use only after confirming a user-accessible USB slot. Primary models are KMTC, KMTD and KMTE wall-mounted systems.
Installer pathway
UTY-NXT-BOX + UTY-NXT-CAB
Required for other compatible units. The cable connects to the indoor PCB and may create access, labour and future-service implications.
1. Exact indoor model2. Model is listed3. Check USB access4. Select pathway
VRF note: To display room temperature correctly in the app, a wired wall controller must be installed and its thermosensor must be active. Otherwise the app may show 0.0 °C and 0% humidity.
Section 4
Compatibility lists
Search this section using Ctrl + F and the full indoor model number.
UTY-ANY1 / UTY-ANY2 ducted controller
R410A indoor models
ARTG24LHTDPARTG30LHTDPARTG36LHTDP
ARTG45LHTDPARTG54LHTDPARTG45LDTA
ARTG54LDTAARTG60LDTAARTG30LHTA
ARTG36LHTAARTG45LHTAARTG54LHTC
ARTG36LHTBARTG45LHTBARTG60LHTA
ARTG65LHTAARTC72LATUARTC90LATU
R32 indoor models
ARTH18KMTAPARTH24KMTAPARTH30KMTAP
ARTH36KMTAPARTH45KMTAPARTH54KMTAP
ARTH60KMTAPARTH24KHTAARTH30KHTA
ARTH36KHTAARTH45KHTAARTH54KHTA
ARTH60KHTAARTH60KHTBARTH65KHTA
ARTH72KHTAARTH90KHTA 
Wi-Fi Adaptor II - preferred direct USB wall-mounted models
Confirm the physical USB slot before quoting. The list below represents the preferred customer-accessible pathway.
ASTG09KMTCASTG12KMTCASTG18KMTC
ASTG22KMTCASTG24KMTCASTG30KMTC
ASTG34KMTCASTH18KMTDASTH22KMTD
ASTH24KMTDASTH30KMTDASTH34KMTD
ASTH24KTME  
Wi-Fi Adaptor II - installer-connected wall-mounted models
Treat these as UTY-NXT-BOX plus UTY-NXT-CAB installations unless current product documentation specifically confirms otherwise.
ASTH07KMCDASTH09KMCDASTH12KMCD
ASTH14KMCDASTH07KNCAASTH09KNCA
ASTH12KNCAASTH14KNCAASTH18KNTA
ASTH22KNTAASTH24KNTAASTH30KNTA
ASTH34KNTAASTG30KMTAASTG30KMTB
ASTG34KMTAASTG34KMTBASTG30CMTA
ASTG30CMTBASTG34CMTAASTG34CMTB
ASTH09CNCAASTH12CNCAASTH18CNTA
ASTH24CNTAASTH30CNTAASTH34CNTA
Wi-Fi Adaptor II - ducted models
ARTH18KMTAPARTH24KMTAPARTH30KMTAP
ARTH36KMTAPARTH45KMTAPARTH54KMTAP
ARTG24LHTDPARTG30LHTDPARTG36LHTDP
ARTG45LHTDPARTG54LHTDPARTG45LDTA
ARTG54LDTAARTG60LDTAARTG65LHTA
ARTH09KSLAPARTH12KSLAPARTH18KSLAP
ARTH09KLLAPARTH12KLLAPARTH18KLLAP
ARTH24KHTAARTH30KHTAARTH36KHTA
ARTH45KHTAARTH54KHTAARTH60KHTA
ARTH60KHTBARTH65KHTAARTH72KHTA
ARTH90KHTA  
Wi-Fi Adaptor II - cassette models
AUTG30KRLAAUTG36KRLAAUTG45KRLA
AUTG54KRLAAUTH09KVLAAUTH12KVLA
AUTH18KVLAAUTH24KVLAAUTH24KRTA
AUTH30KRTAAUTH36KRTAAUTH45KRTA
AUTH54KRTA  
Wi-Fi Adaptor II - floor and ceiling console models
AGTG09KVCAAGTG12KVCAAGTG14KVCA
ABTH18KRTAABTH24KRTAABTH30KRTA
ABTH36KRTAABTH45KRTAABTH54KRTA
Wi-Fi Adaptor II - VRF models
AUXK018GLAHAUXK018GLEHAUXK024GLAHAUXK024GLEH
AUXK030GLAHAUXK030GLEHAUXK034GLAHAUXK034GLEH
AUXK036GLAHAUXK036GLEHAUXK045GLAHAUXK045GLEH
AUXK054GLAHAUXK054GLEHAUXB007GLEHAUXB009GLEH
AUXB012GLEHAUXB014GLEHAUXB018GLEHAUXB024GLEH
AUXM018GLAHAUXM018GLEHAUXM024GLAHAUXM024GLEH
AUXM030GLAHAUXM030GLEHASYA007GCGHASYA007GTAH
ASYA007GTEHASYA009GCGHASYA009GTAHASYA009GTEH
ASYA012GCAHASYA012GCEHASYA012GCGHASYA014GCAH
ASYA014GCEHASYA014GCGHASYA030GTAHASYA030GTEH
ASYA034GTAHASYA034GTEHASYE007GCEHASYE007GTAH
ASYE007GTEHASYE009GCEHASYE009GTAHASYE009GTEH
ASYE012GCAHASYE012GCEHASYE014GCAHASYE014GCEH
ARXK007GLGHARXK009GLGHARXK012GLGHARXK014GLGH
ARXK018GLGHARXK024GLGHARXD007GLEHARXD009GLEH
ARXD012GLEHARXD014GLEHARXD018GLEHARXD024GLEH
ARXA024GLEHARXA030GLEHARXA036GLEHARXA045GLEH
ARXC036GTEHARXC045GTEHARXC060GTEHARXC072GTEH
ARXC090GTEHARXC096GTEHAGYA007GCAHAGYA007GCEH
AGYA007GCGHAGYA009GCAHAGYA009GCEHAGYA009GCGH
AGYA012GCAHAGYA012GCEHAGYA012GCGHAGYA014GCAH
AGYA014GCEHAGYA014GCGHAGYE007GCAHAGYE007GCEH
AGYE009GCAHAGYE009GCEHAGYE012GCAHAGYE012GCEH
AGYE014GCAHAGYE014GCEHABYA012GTEHABYA014GTEH
ABYA018GTEHABYA024GTEHABYA030GTEHABYA036GTEH
ABYA045GTEHABYA054GTEH  
Section 5
Freshdesk response checklist
Use this checklist before confirming compatibility or installation requirements.
1Obtain the full indoor model number.
2Confirm whether the enquiry is for a new installation or retrofit.
3For Wi-Fi, confirm whether the unit has a visible and accessible USB slot.
4For concealed units, explain the likely need for a licensed installer to access the indoor PCB.
5For the ducted controller, confirm model compatibility before discussing duct and damper suitability.
6Never promise compatibility for an unlisted model. Escalate for technical confirmation.
GENERAL Assist  |  Customer Support: 1300 882 201