General Assist Technical Reference
Specifications - ARTG36LHTA & AOTG36LBTC
Indoor and outdoor unit technical specifications
This article provides the technical specifications for the ARTG36LHTA indoor unit and its corresponding AOTG36LBTC outdoor unit.
Quick Answer
| Indoor unit model | ARTG36LHTA |
| Outdoor unit model | AOTG36LBTC |
| Matched system | Yes |
| Power supply | Single phase, 240 V, 50 Hz |
| Cooling capacity | 10.0 kW |
| Heating capacity | 12.5 kW |
| EER / COP | 3.25 / 3.65 kW/kW |
| Refrigerant | R410A |
| Factory charge | 2,900 g |
| Additional charge | 40 g/m over 20 m |
| Maximum piping length / height | 50 m / 30 m |
| External static pressure | Rated 60 Pa / High 100 Pa or 150 Pa / Operation range 60 to 260 Pa |
Model Mapping
- Indoor: ARTG36LHTA
- Outdoor: AOTG36LBTC
- These two units operate as a matched system.
Electrical Specifications
| Item | Specification |
|---|
| Power supply | Single phase, 240 V, 50 Hz |
| Available voltage range | 198-264 V |
| Maximum operating current | 21.1 A |
| Recommended circuit breaker | 32 A |
| Power cable size | 4.0 mm² |
| Connection cable cross-sectional area | 1.5 mm² |
| Limited wiring length | 51 m |
| Specification | Cooling | Heating |
|---|
| Capacity | 10.0 kW | 12.5 kW |
| Capacity range | 5.0-11.4 kW | 5.1-14.0 kW |
| Power consumption | 3.08 kW | 3.42 kW |
| Maximum power consumption | 5.04 kW | 5.04 kW |
| Efficiency | EER 3.25 kW/kW | COP 3.65 kW/kW |
| Rated operating current | 13.0 A | 14.4 A |
| Maximum operating current | 21.1 A | 21.1 A |
| Moisture removal | 1.5 L/h | - |
Direct answer: The EER of ARTG36LHTA is 3.25 kW/kW.
Compressor & Refrigerant Details
- Compressor type: Twin rotary × 1
- Compressor motor output: 2,100 W
- Compressor model: Not specified in the manual
- Compressor weight: Not specified in the manual
- Refrigerant type: R410A
- Factory charge: 2,900 g
- Additional charge rate: 40 g per meter
- Pre-charge length: 20 m
- Maximum piping length: 50 m
- Maximum piping height: 30 m
- Refrigerant oil type: POE (RB68)
- Refrigerant oil amount: 800 cm³
Fan Motor, Speed & Airflow
| Item | Specification |
|---|
| Indoor fan | Sirocco fan × 2; motor output 197 W |
| External static pressure | Rated 60 Pa / High 100 Pa or 150 Pa / Operation range 60 to 260 Pa |
| Indoor airflow - cooling/heating | High 2,500 m³/h; Medium 2,100 m³/h; Low 1,700 m³/h |
| Outdoor fan | Propeller × 1; motor output 111 W |
| Outdoor airflow | Cooling 4,200 m³/h; Heating 4,200 m³/h |
Noise Levels
| Unit | Noise level |
|---|
| Indoor - cooling | High 41 dB(A); Medium 38 dB(A); Low 36 dB(A) |
| Indoor - heating | High 41 dB(A); Medium 38 dB(A); Low 36 dB(A) |
| Outdoor | Cooling 52 dB(A); Heating 54 dB(A); Sound power level 68 dB(A) |
Dimensions & Weight
| Item | Specification |
|---|
| Indoor dimensions | 400 × 1,050 × 500 mm |
| Indoor gross dimensions | 460 × 1,230 × 640 mm |
| Indoor weight | 39 kg net / 46 kg gross |
| Outdoor dimensions | 914 × 970 × 370 mm |
| Outdoor gross dimensions | 1,078 × 1,064 × 479 mm |
| Outdoor weight | 75 kg net / 84 kg gross |
Pipe Connection Details
- Liquid pipe: Ø 9.52 mm (3/8 in.)
- Gas pipe: Ø 15.88 mm (5/8 in.)
- Connection method: Flare
- Drain hose: Ø 23.4 mm I.D. / Ø 25.4 mm O.D.
Operating Range
| Indoor cooling | 18 to 32°C; 80% RH or less |
| Indoor heating | 16 to 30°C |
| Outdoor cooling | -15 to 46°C |
| Outdoor heating | -15 to 24°C |
Direct Answers to Common Questions
- Cooling capacity: 10.0 kW
- Heating capacity: 12.5 kW
- EER: 3.25 kW/kW
- COP: 3.65 kW/kW
- Refrigerant: R410A
- Maximum pipe run: 50 m
- Additional refrigerant: 40 g/m over 20 m
- Maximum piping height: 30 m
