ARTH36KHTA (Indoor) + AOTH36KCTA (Outdoor)
The indoor unit ARTH36KHTA is powered via the outdoor unit and operates on 220–240V, 50Hz with an available range of 198–264V, and the indoor supply is 220–240V. Rated cooling capacity is 10.0 kW (34,100 Btu/h) with a range of 5.0–13.0 kW (17,100–44,400 Btu/h), and rated heating capacity is 12.5 kW (42,700 Btu/h) with a range of 5.2–15.0 kW (17,700–51,200 Btu/h). Cooling input power is 2.60 kW rated / 5.01 kW max and heating input power is 2.94 kW rated / 4.65 kW max, with rated current 11.4A (cooling) and 12.9A (heating). Efficiency is EER 3.85 and COP 4.25, TCSPF is 5.264 (hot), 5.347 (average), 5.694 (cool), and HSPF is 4.909 (hot), 4.580 (average), 4.043 (cool). Cooling sensible capacity is 9.08 kW, power factor is 98.7% (cooling) and 99.1% (heating), moisture removal is 1.4 L/h (2.5 pints/h), and maximum operating current is 22.6A. Airflow for both cooling and heating is 695 / 589 / 486 l/s (high/med/low) using a sirocco fan ×2 with 197W motor output and static pressure 60 to 210 Pa, with sound pressure levels 41 / 38 / 36 dB(A) (high/med/low) and cooling sound power 61 dB(A). Construction, enclosure, piping, drain, operating range, wired controller and IPX0 are as stated in the table.
The outdoor unit AOTH36KCTA operates on 220–240V ~ 50Hz with a voltage range of 198–264V, and has starting current 12.9A. Airflow is 1,236 l/s (4,450 m³/h) in cooling and 1,125 l/s (4,050 m³/h) in heating via a propeller fan ×1 with 120W motor output. Sound pressure level is 53 dB(A) for cooling and heating, with sound power level 70 dB(A). The heat exchanger includes Main 1: 986 × 905 × 18.19 mm, Main 2: 986 × 905 × 18.19 mm, and Sub 1: 966 × 543 × 18.19 mm, using copper tube and aluminium blue-fin, with R32 charge 2,500 g and refrigerant oil RmM68AF 800 cm³. Dimensions are 998 × 940 × 320 mm net (gross 1,176 × 1,027 × 445 mm) with weights 67 kg net / 76 kg gross, piping is Ø9.52 / Ø15.88 flare, pre-charge length is 30 m, maximum length 75 m, maximum height difference 30 m, operating range is −10 to 50°C cooling and −15 to 24°C heating, drain is LDPE with tip Ø13.0 (I.D.) / Ø16.0–Ø16.7 (O.D.), and IP rating is IPX4. Electrical characteristics are 220–240V 50Hz, max operating current 22.6A, starting current 12.9A, circuit breaker 25A, power cable 4.0 mm², connection cable 1.5 mm², and limited wiring length 76 m, while safety devices match the AOTH30KCTA set (250V 30A or 35.5A; 3.15A; 10A×2; fan 150/120; compressor 110°C/7 min, 108°C/≤80°C, −20°C/−15°C in COOL/DRY).