If the automatic setup doesn’t work, you can connect your myanywAiR NEXT device to your Wi-Fi network manually by following these steps:

1. Connect to the Device Network

  • On your computer or laptop, open the Wi-Fi settings.

  • Connect to the network named ANYWAIR-I-XXXXX (your device’s unique network).

  • You will not have internet access — this is normal. Continue without internet access during setup.

2. Open the Configuration Page

  • Open a web browser and enter the following address in the URL bar:
    http://192.168.4.1

  • A configuration window will open.

3. Enter Your Wi-Fi Details

  • Type in your Wi-Fi network name (SSID) and password.
    ⚠️ Both are case-sensitive — ensure you enter them exactly as they appear on your router.

4. Save the Configuration

  • Click ‘Configure Wi-Fi’ (or ‘Configure’, depending on your browser).

  • Your air conditioner’s Wi-Fi indicator light will begin blinking as it connects to the network.

5. Confirm the Connection

  • Wait until the Wi-Fi light stops blinking — this means the connection is complete.

  • A notification will appear on the configuration page stating:
    “Wi-Fi Credentials Saved.”

✅ Your myanywAiR NEXT is now connected to your Wi-Fi network.
You can return to the myanywAiR NEXT app to complete setup and begin controlling your Fujitsu air conditioner remotely.