General Assist How-To Guide
How to Reset Wi-Fi and Password for myanywAiR NEXT
Reconnect your adaptor after changing your modem, router, network name or Wi-Fi password
If your myanywAiR NEXT adaptor needs to connect to a new Wi-Fi network or router, its existing Wi-Fi settings must be reset before it can be configured again in the app.
When to Perform a Wi-Fi Reset
Reset the Wi-Fi settings when:
- Your internet modem or router has been replaced.
- The network name (SSID) or Wi-Fi password has changed.
- The adaptor is not appearing online in the myanywAiR app.
- Ownership of the unit has transferred to a new user.
Wi-Fi Reset Options
There are two reset methods. Use the method that applies to your indoor unit or controller type.
Option 2: Withdrawal or Physical Reset Method
Applicable models: Other wall-hung, ducted, cassette and bulkhead systems that do not support controller-based reset.
Reset the adaptor manually using the following plug-in and plug-out sequence.
| Step | Action |
|---|---|
| 1 | Unplug the myanywAiR NEXT adaptor from its port or connector. |
| 2 | Wait 3 seconds. |
| 3 | Plug the adaptor back in, then remove it again after 2 seconds. |
| 4 | Repeat the plug-in and plug-out sequence 10 times. |
Reset confirmation: After the 10th cycle, the Wi-Fi LED on the air conditioner should begin blinking slowly. This confirms that the previous Wi-Fi settings have been cleared and the adaptor is ready to be configured again.
Reconnect the adaptor using the Wi-Fi setup wizard in the myanywAiR NEXT app.
Accessibility and Placement Tips
The adaptor should remain accessible for future servicing or network changes.
| Unit Type | Recommended Access Arrangement |
|---|---|
| Wall-hung units | Coil a small length of adaptor cable and place it neatly above the unit, out of sight but within reach. |
| Ducted units | Route the adaptor lead into the return-air box so it can be accessed through the same panel or grille used for filter cleaning. |
| Cassette or bulkhead units | Keep the adaptor accessible through the service panel or ceiling cavity. |
After the Reset
- Open the myanywAiR NEXT app.
- Follow the Wi-Fi setup wizard to connect the adaptor to the new network.
- Confirm that the Wi-Fi indicator becomes steady, indicating a successful connection.
Reset Method Summary
| Model Type | Reset Method | Accessibility Notes |
|---|---|---|
| KMTC / KMTD / KMCD | Controller reset | Use the built-in Wi-Fi menu. |
| Wall-hung / Lifestyle / Other | Withdrawal method - plug and unplug 10 times | Keep the adaptor accessible above the unit. |
| Ducted | Withdrawal method | Access through the return-air grille or filter panel. |
Important: Resetting the Wi-Fi connection clears the adaptor's saved network details. The air conditioner must then be connected to the replacement network through the myanywAiR NEXT app.