When utilizing the anywair ducted controller, the AC can operate and control temperature from either the return air sensor or the mainzone sensor.
The anywair system comes factory set to control from the return air sensor. If the customer would like to control the AC from the mainzone sensor, the below steps will need to take place:
1. Turn power off to the AC
2. Turn off DIP switch no5 of 10 on the orange control box
3. Turn power on
4. Allow controller to boot up
5. Go to the zone screen
6. Click on the grey thermometer symbol in the zone required to be the sensing point
7. This symbol will darken and become the control point for the AC to heat/cool.