AIRSTAGE | Controller Operation Guide
UTY-DTGY Touch Panel Controller Operation - Part 1
Operating and configuration overview for UTY-DTGY and UTY-DTGG centralized controllers
Important document note: This article relates to UTY-DTGY Part 1. Due to email attachment capacity, each PDF must be sent separately. Refer to Part 2 for the remaining sections of the full manual.
Controller scope: The UTY-DTGY / UTY-DTGG Touch Panel Controller provides centralized monitoring and control of multiple indoor units, remote-controller groups and grouped areas from one interface.
1. Overview
The AIRSTAGE Touch Panel Controller is a centralized control device designed to monitor, operate and configure multiple air conditioning systems from one panel.
The controller supports structured control through remote-controller groups, groups and groups of groups. This allows large installations to be arranged by room, tenancy, floor, building area or operational zone.
| Item | Details |
|---|---|
| Applicable models | UTY-DTGY and UTY-DTGG |
| Controller type | Centralized AIRSTAGE touch panel controller |
| Main functions | Monitoring, operation control, system setting, scheduling, preference setting and history review |
| Group hierarchy | R.C. Group, Group and Group of Groups |
2. Manual Structure
| Section | Purpose |
|---|---|
| Introduction and Safety | Warnings, cautions, touchscreen precautions and general safety information. |
| System Outline | Basic screens, terminology, controller parts, system layout, passwords and group organization. |
| Initialization and Setting | Language, date and time, group settings, scheduling, passwords and installer setup. |
| Monitor | System status, icon/list views, group selection, On/Off operation and error display. |
| Control | Mode, set temperature, fan speed, airflow direction, economy, anti-freeze and test operation. |
| Preference and History | Brightness, sound, backlight, error history, status history and operation history. |
3. Key Features
Monitoring Mode
Displays indoor unit status in icon or list view, including group name, operating mode, set temperature, filter status and error condition.
Centralized Control
Allows On/Off control, mode selection, temperature adjustment, fan speed selection, airflow-direction changes and optional-operation settings.
Group Management
Supports creation, renaming, movement and deletion of remote-controller groups and higher-level groups for efficient site organization.
USB Data Handling
Group-composition files and other supported data can be exported to or imported from compatible USB memory for backup or configuration transfer.
Error and History Review
Displays active errors and provides access to error, status and operation-history information for service review.
4. Initialization Sequence
Installer requirement: Initialization should be completed only after installation work and system wiring are complete. Follow the applicable installation instructions before registering indoor units.
| Step | Action | Key requirement |
|---|---|---|
| 1 | Turn on power | Confirm controller starts correctly and touchscreen is responsive. |
| 2 | Set language | Select the required display language. |
| 3 | Set date and time | Set current date, time, display format and summer-time settings as applicable. |
| 4 | Open installer settings | Confirm touch-panel controller address and system settings. |
| 5 | Register indoor units | Register units by the approved method and confirm addresses and operating order. |
| 6 | Complete initialization | Verify units are visible, grouped correctly and ready for operation. |
5. Monitoring and Control Operations
| Function | Description |
|---|---|
| Icon / List view | Switch between graphical icon view and detailed list view. |
| Group selection | Select one group, multiple groups or all displayed groups before applying commands. |
| On / Off | Start or stop the selected indoor units or groups. |
| Operating mode | Select available modes, subject to unit capability and any controller prohibitions. |
| Set temperature | Adjust the set temperature within the limits supported by the selected units. |
| Fan and airflow | Set fan speed and available vertical or horizontal airflow direction. |
| Optional settings | Includes economy operation, anti-freeze, filter-sign reset, test operation and special-state display where supported. |
| Error list | Displays active error name, address and error code for affected units. |
Operational limitation: Functions that are not available on the selected indoor unit cannot be selected. Controller-prohibited functions may also appear unavailable.
6. Schedule Management
The controller supports scheduled operation for selected groups and remote-controller groups. Schedules can be created, enabled, disabled, renamed, copied and deleted.
| Schedule function | Application |
|---|---|
| Create schedule | Create and name a new schedule. |
| Assign groups | Select the groups or R.C. Groups that will operate under the schedule. |
| Set calendar | Apply schedule patterns to dates or custom recurring days. |
| Set operation pattern | Program time, On/Off state, mode, set temperature and control restrictions. |
| Copy pattern | Copy an existing pattern to another schedule position to reduce setup time. |
Group-setting warning: Changes to group structure can affect schedule assignments and displayed group names. Review schedules after changing group composition.
7. Password and Access Structure
| Access area | Typical controlled functions |
|---|---|
| User setting / history | Preference settings, schedule access and history review. |
| Operation setting | On/Off, mode, temperature, fan and other operational commands. |
| Installer setting | System initialization, indoor-unit registration, address configuration and installer-only parameters. |
8. Service and Maintenance Notes
- Use only the touchscreen or approved touch pen. Do not use sharp or pointed objects.
- Keep the panel dry and do not expose it to liquids or direct water spray.
- Confirm all address and group data before importing configuration files.
- Export and retain a current backup before making major group or schedule changes.
- Review the error list and history before resetting faults or changing system configuration.
Summary: Part 1 covers the core UTY-DTGY / UTY-DTGG operating workflow, including safety, system structure, monitoring, centralized control, initialization, group management and schedule setup. Refer to the separate Part 2 document for the remaining sections of the full operating manual.